Microchip CuriosityPro PIC32CMJH01

From SEGGER Wiki
Jump to navigation Jump to search

This article describes specifics for the Microchip Curiosity Pro PIC32CMJH01 evaluation board.
Microchip PIC32CMJH01 PIC32CM5164JH01 board.jpg

Preparing for J-Link

  • Connect the J-Link to CORTEX DEBUg.
  • Power the board via DEBUG USB.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Microchip PIC32CMJH01 PIC32CM5164JH01 connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Microchip Curiosity Pro PIC32CMJH01 .
It is a simple Hello World sample linked into the internal flash.

SETUP