MindMotion Mini-F0040

This article describes specifics for the MindMotion Mini-F0040 evaluation board.
[PICTURE OF BOARD] 450px

Preparing for J-Link

• Connect the J-Link to CN2.
• Power the board via CN1.
• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-F0040.
It is a simple Hello World sample linked into the internal flash.

SETUP

• J-Link software: V7.86f
• Embedded Studio: V6.34
• Hardware: MindMotion Mini-F0040
• Link: File:MindMotion Mini-F0040 MM32F0040B1T TestProject ES 6V34.zip