MindMotion Mini-F0163

From SEGGER Wiki
Jump to navigation Jump to search

This article describes specifics for the MindMotion Mini-F0163 evaluation board.
[PICTURE OF BOARD] File:MindMotion Mini-F0163 MM32F0163D7PV board.jpg

Preparing for J-Link

  • Connect the J-Link to CN5.
  • Power the board via CN2 or CN3.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MindMotion Mini-F0163 MM32F0163D7PV connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-F0163.
It is a simple Hello World sample linked into the internal flash.

SETUP