NXP FRDM-KE17Z512

From SEGGER Wiki
Jump to navigation Jump to search

This article describes specifics for the NXP FRDM-KE17Z512 evaluation board.
NXP FRDM-KE17Z512 board.jpg

Preparing for J-Link

  • Connect the J-Link to ......
  • Power the board via........
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

[PICTURE OF CONNECT] File:NXP FRDM-KE17Z512 connect.PNG

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP FRDM-KE17Z512.
It is a simple Hello World sample linked into the internal flash.

SETUP