Realtek RTL-AMEBAD MB 3V0 RTL8720DF

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the Realtek RTL-AMEBAD_MB_3V0_RTL8720DF evaluation board.

Realtek RTL-AMEBAD MB 3V0 RTL8720DF board.jpg

Preparing for J-Link

  • Connect the J-Link to J35 GND@1 Vtref@2 SWDIO@3 SWCLK@4
  • Power the board via CON1
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Realtek RTL-AMEBAD MB 3V0 RTL7820DF connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Realtek RTL-AMEBAD_MB_3V0_RTL8720DF.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=Realtek_RTL-AMEBAD_MB_3V0_RTL8720DF&oldid=15080"