Renesas FPB-R9A02G021

This article describes specifics for the Renesas FPB-R9A02G021 evaluation board.

Preparing for J-Link

• Connect the J-Link to J15.
• Power the board via J17.
• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas FPB-R9A02G021.
It is a simple Hello World sample linked into the internal flash.

SETUP

• Embedded Studio RISC-V: V7.20
• Hardware: Renesas FPB-R9A02G021
• Link: File:Renesas Sapporo5 R9A02G021 TestProject ES RV 7V20.zip