ST NUCLEO-F031K6

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the ST NUCLEO-F031K6 evaluation board.
ST-NUCLEO-F031K6.jpeg

Preparing for J-Link

  • Power the board via CN1 (Micro USB)
  • Reflash the ST-LINK On-Board Into a J-Link Guide
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

F031K6 con.PNG

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ST NUCLEO-F031K6.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=ST_NUCLEO-F031K6&oldid=16192"