ST NUCLEO-F091RC

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the ST NUCLEO-F091RC evaluation board.
ST NUCLEO-F091RC con.jpeg

Preparing for J-Link

  • Power the board via CN1 (Mini USB)
  • Reflash the ST-LINK On-Board Into a J-Link Guide
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

STM32F091RC.PNG

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ST NUCLEO-F091RC.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=ST_NUCLEO-F091RC&oldid=15694"