ST SR6P6-EVBC8000P

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the ST SR6P6-EVBC8000P evaluation board.
450px

Preparing for J-Link

  • Connect the J-Link to P9.
  • Power the board via J6 (12V).
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

ST SR6P6-EVBC8000P SR6G7C8 connect.png

Retrieved from "https://wiki.segger.com/index.php?title=ST_SR6P6-EVBC8000P&oldid=14894"