SemiDrive SD126 E3205 LQFP144 DEV KIT
This article describes specifics for the SemiDrive SD126_E3205_LQFP144_DEV_KIT. It can be used to test & verify E32xx device support.
Minimum requirements
- J-Link software V7.88d or later
Preparing for J-Link
- Connect the J-Link to the JTAG header (J301)
- Power the board via external power supply with 5V (J801)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows: