Search results

Create the page "NAND Flash" on this wiki! See also the search results found.

• NXP i.MX 8M Mini
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  1 KB (212 words) - 10:21, 8 April 2024
• NXP i.MX 8
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  2 KB (279 words) - 09:41, 8 April 2024
• SEGGER Flash Loader
  == SEGGER Flash Loader == ...ce_Support_Kit | J-Link Device Support Kit (DSK)]] and allows users to add flash programming support for a new device on their own.
  24 KB (3,557 words) - 14:59, 20 November 2023
• Programming non memory-mapped flash
  ...nnected to an MCU. Some are designed to allow execution in place where the flash is readable by the MCU in its address space (like RAM and peripheral regist !Flash type
  4 KB (640 words) - 10:26, 6 September 2018
• MSD
  ...o a storage medium. The storage medium can be a simple RAM-disk, NOR, NAND flash, SD card and so on. Sector-wise access means that the protocol itself does
  2 KB (374 words) - 16:01, 26 June 2019
• UM08003 JFlash
  The following chapter introduces J-Flash, highlights some of its features, and lists its requirements on host and ta [[File:JFlash_MainWindow.png|thumb|left|J-Flash main window]]
  72 KB (10,586 words) - 13:00, 25 March 2024
• Write amplification
  ...occurs when the data is written to a storage device such as a NAND or NOR flash. It causes more data to be written to the storage device than the file syst == The write amplification of Universal NAND driver ==
  4 KB (608 words) - 11:29, 17 April 2023
• ROM Bootloader
  ...different boot sources (internal flash, external QSPI flash, external NAND flash, ...), so where to start the user application from ...potentially open the debug interface, boot from a different source, setup flash partitioning, ... depending on the option bytes values
  7 KB (1,198 words) - 11:08, 12 July 2023
• List of supported NAND flashes
  emFile's NAND flash driver use a common interface to talk to NAND flashes. Therefore both can be used based on the desired interface type, so ...the NAND by itself, so in most cases only the HW-interface from MCU to the NAND needs to be written.
  44 KB (6,356 words) - 16:02, 14 April 2023
• NXP i.MX 8M
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  1 KB (210 words) - 10:28, 8 April 2024
• NXP i.MX 8M Nano
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  1 KB (210 words) - 10:28, 8 April 2024
• NXP i.MX 8M Plus
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  2 KB (293 words) - 10:29, 8 April 2024
• NXP i.MX 8X
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  2 KB (330 words) - 16:08, 5 April 2024
• NXP i.MX 8XLite
  Programming of external boot media(eMMC, SDHC, QSPI/NAND Flash) is supported natively through USB Serial interface.
  2 KB (317 words) - 12:13, 5 April 2024
• UM08022 Flasher
  Flasher is a programming tool for microcontrollers with on-chip or external flash memory. Flasher is designed for programming flash targets with the J-Flash software or stand-alone.
  155 KB (23,284 words) - 08:54, 3 April 2024
• eMMC
  An eMMC, like most other memory cards, combines NAND flash memory with a flash memory controller. ...ontroller is responsible for the management of the data stored on the NAND flash memory, which means that the file system software is not required to perfor
  2 KB (266 words) - 10:08, 14 December 2023