TI AM335x

From SEGGER Wiki
Jump to: navigation, search



  • Since V6.98b of the J-Link software, RTT can be used out-of-the-box.
  • When using RTT control block auto-detection, J-Link searches in the internal SRAM @ 0x40300000 - 0x4030FFFF (64 KiB) for an RTT control block
  • The internal SRAM located at 0x402F0400 cannot be used for RTT as it is not accessible by the AHB-AP via which RTT accesses are performed.
  • As the TI AM335x series implements cache, please refer to the RTT wiki article for further instructions / information: RTT wiki article