Difference between revisions of "NXP LPCXpresso55S36"
(Created page with "__TOC__ This article describes specifics for the NXP LPCXpresso55S36 evaluation board. 450px == Minimum requirements == * J-Link software V7.54 or...") |
|||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 15:24, 8 May 2024
This article describes specifics for the NXP LPCXpresso55S36 evaluation board.
Minimum requirements
- J-Link software V7.54 or later
Preparing for J-Link
The LPC55S36 EVK comes with a standard 20-Pin debug connector.
- Connect the J-Link to the 20-pin SWD debug connector
- Power the board using the mini USB connector
The result should be looking like this:
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the LPCXpresso55S36. It is a simple Hello World sample linked into the internal flash.
SETUP:
- J-Link software: V7.54
- Embedded Studio: V5.50
- Hardware: NXP LPCXpresso55S36
- Link: File:NXP LPC55S36 TestProject ES V550.zip