Difference between revisions of "NXP MIMXRT685-EVK"
(Created page with "== J-Link OB == The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board that can be reprogrammed via [https://www.nxp.com/lpcscrypt NXP LPCScrypt] to a J-Link OB. In order to...") |
|||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
== J-Link OB == |
== J-Link OB == |
||
The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board that can be reprogrammed via [https://www.nxp.com/lpcscrypt NXP LPCScrypt] to a J-Link OB. |
The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board that can be reprogrammed via [https://www.nxp.com/lpcscrypt NXP LPCScrypt] to a J-Link OB. |
Latest revision as of 13:17, 15 May 2024
J-Link OB
The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board that can be reprogrammed via NXP LPCScrypt to a J-Link OB.
In order to make sure that the J-Link OB can properly access the i.MXRT685 MCU on the board, the following jumper conditions must be met:
- JP17 closed
- JP18 closed
- JP19 closed
External J-Link
The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board which acts as a J-Link OB.
In order to make sure that an external J-Link connected to J19 (debug header) can properly access the i.MXRT685 MCU on the board, the following jumper conditions must be met:
- JP17 open
- JP18 open
- JP19 open