Difference between revisions of "Nuvoton M26x"
(→Internal RAM) |
|||
Line 7: | Line 7: | ||
! Device || StartAddr !! Size |
! Device || StartAddr !! Size |
||
|- |
|- |
||
− | | M261x|| 0x20000000 || 32+64Kb |
+ | | M261x || 0x20000000 || 32+64Kb |
|- |
|- |
||
− | | |
+ | | M262x || 0x20000000 || 32+64Kb |
|- |
|- |
||
− | | |
+ | | M263x || 0x20000000 || 32+64Kb |
|} |
|} |
||
− | |||
==Supported Flash Banks== |
==Supported Flash Banks== |
Revision as of 17:54, 9 January 2023
Contents
The Nuvoton M26x series are 32-bit low-power microcontrollers based on the Arm®
Cortex®-M23 processor.
Internal RAM
Device | StartAddr | Size |
---|---|---|
M261x | 0x20000000 | 32+64Kb |
M262x | 0x20000000 | 32+64Kb |
M263x | 0x20000000 | 32+64Kb |
Supported Flash Banks
Internal Flash
Device | StartAddr | Size | J-Link Support |
---|---|---|---|
M261x | 0x00000000 | 265+256Kb | YES |
M2612 | 0x00000000 | 265+256Kb | YES |
M2613 | 0x00000000 | 265+256Kb | YES |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82b or later
Evaluation Boards
- GigaDevice GD32A503-EVAL evaluation board: https://wiki.segger.com/GigaDevice_GD32A503-EVAL
Example Application
- GigaDevice GD32A503-EVAL evaluation board: https://wiki.segger.com/GigaDevice_GD32A503-EVAL#Example_Project