Difference between revisions of "MindMotion Mini-F0163"
(Created page with "__TOC__ This article describes specifics for the MindMotion Mini-F0163 evaluation board.<br> '''[PICTURE OF BOARD]''' File:MindMotion_Mini-F0040_MM32F0040B1T_board.jpg|450p...") |
|||
| Line 3: | Line 3: | ||
This article describes specifics for the MindMotion Mini-F0163 evaluation board.<br> |
This article describes specifics for the MindMotion Mini-F0163 evaluation board.<br> |
||
'''[PICTURE OF BOARD]''' |
'''[PICTURE OF BOARD]''' |
||
| − | [[File:MindMotion_Mini- |
+ | [[File:MindMotion_Mini-F0163_MM32F0163D7PV_board.jpg|450px]] |
== Preparing for J-Link == |
== Preparing for J-Link == |
||
| Line 9: | Line 9: | ||
*Power the board via CN1. |
*Power the board via CN1. |
||
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
| − | [[File:MindMotion_Mini- |
+ | [[File:MindMotion_Mini-F0163_MM32F0163D7PV_connect.png|400px]] |
== Example Project== |
== Example Project== |
||
Revision as of 07:04, 27 March 2023
This article describes specifics for the MindMotion Mini-F0163 evaluation board.
[PICTURE OF BOARD]
450px
Preparing for J-Link
- Connect the J-Link to CN2.
- Power the board via CN1.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-F0163.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.86f
- Embedded Studio: V6.34
- Hardware: MindMotion Mini-F0163
- Link: File:MindMotion Mini-F0163 MM32F0163D7PV TestProject ES 6V34.zip
