Difference between revisions of "GigaDevice GD32A5"
(→Internal Flash) |
(→Connect) |
||
Line 26: | Line 26: | ||
==Device Specific Handling== |
==Device Specific Handling== |
||
===Connect=== |
===Connect=== |
||
− | * On Connect, protection level is checked. |
+ | * On Connect, protection level is checked. For further information regarding this, please click [[GigaDevice_GD32| here]]. |
===Reset=== |
===Reset=== |
Revision as of 11:27, 16 February 2024
The GD32A50x series are 32-bit general-purpose microcontrollers based on the Arm® Cortex®-M33 processor.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Main flash Bank 0 | 0x08000000 | Up to 256 KB | |
Main flash Bank 1 | 0x08040000 | 128 KB | |
Option Byte 0 | 0x1FFFF800 | 24 B |
ECC RAM
In order to prevent errors when reading first time, the DLL initializes the first 24Kb of RAM starting at 0x2000 0000.
Watchdog Handling
- The device does have 2 watchdogs.
- The watchdogs are fed during flash programming.
Device Specific Handling
Connect
- On Connect, protection level is checked. For further information regarding this, please click here.
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.