Difference between revisions of "GigaDevice GD32A5"
(→Internal Flash) |
(→Internal Flash) |
||
Line 16: | Line 16: | ||
|- |
|- |
||
| Option Byte 0 || 0x1FFFF800 || 24 B || style="text-align:center;"| {{YES}} |
| Option Byte 0 || 0x1FFFF800 || 24 B || style="text-align:center;"| {{YES}} |
||
+ | |- |
||
+ | | Option Byte 1 || 0x4002 2068|| 4 B || style="text-align:center;"| {{NO}} |
||
+ | |- |
||
+ | | OTP Bytes || 0x1FFF7000 || 1 KB || style="text-align:center;"| {{NO}} |
||
|} |
|} |
||
Revision as of 16:27, 16 February 2024
The GD32A50x series are 32-bit general-purpose microcontrollers based on the Arm® Cortex®-M33 processor.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Main flash Bank 0 | 0x08000000 | Up to 256 KB | |
Main flash Bank 1 | 0x08040000 | 128 KB | |
Data flash | 0x08800000 | up to 64 KB | |
Option Byte 0 | 0x1FFFF800 | 24 B | |
Option Byte 1 | 0x4002 2068 | 4 B | |
OTP Bytes | 0x1FFF7000 | 1 KB |
ECC RAM
In order to prevent errors when reading first time, the DLL initializes the first 24Kb of RAM starting at 0x2000 0000.
Watchdog Handling
- The device does have 2 watchdogs.
- The watchdogs are fed during flash programming.
Device Specific Handling
Connect
- On Connect, protection level is checked. For further information regarding this, please click here.
Reset
- The device uses normal Cortex-M reset, no special handling necessary, like described here.