Difference between revisions of "CVA BlueWhale CVM0118-EVK"
Arne.kulinna (talk | contribs) (Created page with "__TOC__ This article describes specifics for the CVA BlueWhale CVM0118-EVK evaluation board. It can be used to test & verify CVM011x device support. File:CVA_BlueWhale_CVM...") |
|||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 14:33, 10 May 2024
This article describes specifics for the CVA BlueWhale CVM0118-EVK evaluation board. It can be used to test & verify CVM011x device support.
Minimum requirements
- J-Link software V7.88 or later
Preparing for J-Link
- Select MCU to be powered (short JP8)
- Select MCU operating voltage 5V (short JP1 2&3)
- Select USB as power supply (short JP2 2&3)
- Connect the J-Link to the JTAG connector (J8)
- Power the board via external power supply USB (J11)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows: