Difference between revisions of "Realtek RTL-AMEBAD MB 3V0 RTL8720DF"
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 15:16, 15 May 2024
This article describes specifics for the Realtek RTL-AMEBAD_MB_3V0_RTL8720DF evaluation board.
Preparing for J-Link
- Connect the J-Link to J35 GND@1 Vtref@2 SWDIO@3 SWCLK@4
- Power the board via CON1
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Realtek RTL-AMEBAD_MB_3V0_RTL8720DF.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V6.86c
- Embedded Studio: V6.34
- Hardware: Realtek RTL-AMEBAD_MB_3V0_RTL8720DF
- Link: File:Realtek RTL-AMEBAD MB 3V0 RTL8720DF TestProject ES V634.zip