Difference between revisions of "MindMotion MM32F3"
(→Lock and Unlock Support) |
|||
Line 1: | Line 1: | ||
+ | [[Category:Device families]] |
||
__TOC__ |
__TOC__ |
||
The Mimdmotion MM32F3 series are 32-bit general-purpose microcontrollers based on the Arm® |
The Mimdmotion MM32F3 series are 32-bit general-purpose microcontrollers based on the Arm® |
Latest revision as of 15:10, 15 May 2024
Contents
The Mimdmotion MM32F3 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M3 processor.
Device Family
Device Family | Flash Size | RAM Size |
---|---|---|
MM32F327 | up to 512Kb | 128Kb |
Supported Flash Banks
Internal Flash
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F327 | 0x08000000 | up to 512Kb | Yes |
- Unlocking of Flash read protection not supported yet.
Option Byte
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F327 | 0x1FFFF800 | 40b | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82e or later
Lock and Unlock Support
MM32xx Lock and Unlock Support
Evaluation Boards
- Mindmotion MM32F3270 MB-036 evaluation board: https://wiki.segger.com/Mindmotion-MB-036