Difference between revisions of "Renesas FPB-R9A02G021"
(→Preparing for J-Link) |
|||
| Line 1: | Line 1: | ||
| + | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 13:31, 15 May 2024
This article describes specifics for the Renesas FPB-R9A02G021 evaluation board.
Preparing for J-Link
- Connect the J-Link to J15.
- Power the board via J17.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas FPB-R9A02G021.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio RISC-V: V7.20
- Hardware: Renesas FPB-R9A02G021
- Link: File:Renesas Sapporo5 R9A02G021 TestProject ES RV 7V20.zip
