Difference between revisions of "Analog ADuCM430"
Line 1: | Line 1: | ||
+ | [[Category:Device families]] |
||
__TOC__ |
__TOC__ |
||
This article describes the device specific handling for Analog Devices ADuCM430 family which is based on Cortex-M3. |
This article describes the device specific handling for Analog Devices ADuCM430 family which is based on Cortex-M3. |
Latest revision as of 10:52, 16 May 2024
Contents
This article describes the device specific handling for Analog Devices ADuCM430 family which is based on Cortex-M3.
Flash Banks
Internal Flash
Base address | Size | J-Link Support |
---|---|---|
0x00000000 | Up to 1 MB |
Device Specific Handling
Reset
The J-Link software performs a device specific reset which ensures that the MCU is not halted after the boot ROM has been executed but before starting the user application code.
Evaluation Boards
- Analog Devices EV-ADuCM340ARDZ: Analog Devices EV-ADuCM340ARDZ
Example Application
- Analog Devices EV-ADuCM340ARDZ: Analog Devices EV-ADuCM340ARDZ#Example_Project