Renesas FPB-R9A02G021
Revision as of 17:52, 18 March 2024 by Torben.scharping (talk | contribs)
This article describes specifics for the Renesas FPB-R9A02G021 evaluation board.
Preparing for J-Link
- Connect the J-Link to J15.
- Power the board via J17.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas FPB-R9A02G021.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio RISC-V: V7.20
- Hardware: Renesas FPB-R9A02G021
- Link: File:Renesas Sapporo5 R9A02G021 TestProject ES RV 7V20.zip