RISC-V
RISC-V is an open source CPU specification. RISC-V is not a single CPU, it is merely a standard which RISC-V devices have to follow. RISC-V is maintained by the RISC-V foundation (https://riscv.org). All relevant documents are in the public domain. There are various different CPU cores defined. The word is not fixed, it can range from 32-bits to 128bits. In reality, most implementations are 32-bit (RV32) or 64-bit (RV64). RISC-V is an alternative to the ARM architecture, owned by ARM (http://www.arm.com). ARM cores are designed and licensed by ARM only. The licensees are bound by the restrictive license terms and usually pay significant license fees.
Contents
ISA Variants
Numerous ISA (Instruction Set Architecture) variants are defined by the specification. The most common ones are:
ISA Name | Explanation |
---|---|
RV32I | Basic 32-bit CPU with 32 general purpose registers, no multiply / divide instruction. |
RV64I | Basic 64-bit CPU with 32 general purpose registers, no multiply / divide instruction. |
RV128I | Basic 128-bit CPU with 32 general purpose registers, no multiply / divide instruction. |
RV32E | Basic 32-bit "embedded" CPU with integer capabilities and 16 General purpose registers, no multiply / divide instruction. |
RV32ICM | RV32I + Compressed instruction support + multiply / divide instructions. |
RV32ECM | RV32E + Compressed instruction support + multiply / divide instructions. |
So there are basically 2 variants, I and E. The I variant is the classical, standard variant with 32 registers, where the E-variant comes with only 16 registers.
RV32I, RV64I, RV128I
This is the standard variant with 32 registers.
RV32E
The embedded variant. In an effort to reduce the core size (silicon footprint) of the CPU, this has been created. Reducing the number of registers reduces cores size and power consumption by about 25% (acc. to spec). Everything is kept identical to RV32I, with the exception of the number of registers. The spec says:
RV32E uses the same instruction-set encoding as RV32I, except that only registers x0 – x15 are provided. Any future standard extensions will not make use of the instruction bits freed up by the reduced register-specifier fields and so these are available for custom extensions.
So the E variant reduces the size of the core, but it does not take advantage of the instruction bits freed up, so it does not allow the compiler to generate smaller code.
ISA extensions
There are various optional extensions, available in the Machine ISA Register misa (-> 3.1.1 of spec)
Bit | Character | Description |
---|---|---|
0 | A | Atomic extensions |
1 | B | Bit manipulation extensions (tentative) |
2 | C | Compressed extension (More efficient encoding of instructions, reducing code size) |
3 | D | Double-precision floating-point extension |
4 | E | RV32E, "Embedded" base ISA (not an extension). Means 16 general purpose registers only, in contrast to the I-variant |
5 | F | Single-precision floating-point extension |
6 | G | Additional standard extensions |
7 | H | Hypervisor extension |
8 | I | Base "integer" ISA variant for 32-register cores RV32I, RV64I, RV128I. Not an extension. In contrast to the E-variant. |
9 | J | Dynamically Translated Languages extension (tentative) |
10 | K | Reserved |
11 | L | Decimal Floating-Point extension (tentative) |
12 | M | Integer Multiply/Divide extension |
13 | N | User-level interrupts supported |
14 | O | Reserved |
15 | P | Packed-SIMD extension (tentative) |
16 | Q | Quad-precision floating-point extension |
17 | R | Reserved |
18 | S | Supervisor mode implemented |
19 | T | Transactional Memory extension (tentative) |
20 | U | User mode implemented |
21 | V | Vector extension (tentative) |
22 | W | Reserved |
23 | X | Non-standard extensions present |
24 | Y | Reserved |
25 | Z | Reserved |
Programmer's view
The RISC-V is very similar to MIPS processor, with different instruction encoding.
Registers
The standard I variant comes with 32 registers (x0 - x31), where register 0 (x0) is hardwired to 0. There is also a PC, which has the same size as the registers. There is no flag register, so no carry, zero or sign flag.
Available implementations
There are various implementations available from different sources. Some implementations can be freely used, others are commercial.
Vendors
- SiFive http://www.sifive.com
- Andes Technology http://www.andestech.com
Debug interface
There is draft debug standard defined by the RISC-V foundation. However, this debug standard defines only JTAG, no cJTAG or SWD access and is not followed by every vendor See https://github.com/riscv/riscv-debug-spec
References
- RISC-V Foundation https://riscv.org
- The RISC-V Instruction Set Manual Volume I: Unprivileged ISA https://riscv.org/specifications/
- ISA specification https://riscv.org/2019/07/risc-v-foundation-announces-ratification-of-the-risc-v-base-isa-and-privileged-architecture-specifications/
- Official debug spec https://github.com/riscv/riscv-debug-spec