Analog ADuCM430

From SEGGER Wiki
Revision as of 11:15, 10 October 2023 by Fabian (talk | contribs)
Jump to: navigation, search

This article describes the device specific handling for Analog Devices ADuCM430 family which is based on Cortex-M3.

Flash Banks

Internal Flash

Base address Size J-Link Support
0x00000000 Up to 1 MB YES.png

Device Specific Handling


The J-Link software performs a device specific reset which ensures that the MCU is not halted after the boot ROM has been executed but before starting the user application code.

Evaluation Boards

Example Application