Enable J-Link log file

From SEGGER Wiki
Revision as of 18:04, 5 August 2016 by Erik (talk | contribs)
Jump to: navigation, search

Enable J-Link Log File

Software which uses the J-Link DLL to include J-Link support (e.g. IDEs), can implement an option to specify a J-Link log file. As this is no must, the J-Link log file can also be set / overwritten using the J-Link Control Panel. This allows to create a log file independent of the used software. Please note, right now the J-Link Control Panel is available in the windows software package, only.

Following steps needs to be done to configure the J-Link log file using the J-Link Control Panel:

  1. Open the J-Link Commander
  2. Click the small green J-Link icon in the windows task bar
  3. Switch to the Settings tab in the J-Link Control Panel
  4. Check the Override checkbox in the Log file section and specify a path to the log file
  5. Close the J-Link Commander
  6. From now, any J-Link DLL based application uses the J-Link log file override

J-Link Commander

Apart from the option above, the J-Link Commander allows to configure the J-Link log file using the "log <LogFilePath>" command.

Retrieved from "https://wiki.segger.com/index.php?title=Enable_J-Link_log_file&oldid=526"