Difference between revisions of "Flasher/Download project to Flasher"
(Created page with "== U-Flash == * "Send to Flasher" Button (equals to "-download" CLI option) Use the "Configuration Project Name" entry in the Project Settings to set the Name of the files to...") |
m |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | Configure the Flasher for [https://wiki.segger.com/UM08022_Flasher#Operating_modes Stand-Alone Mode] |
||
== U-Flash == |
== U-Flash == |
||
* "Send to Flasher" Button (equals to "-download" CLI option) |
* "Send to Flasher" Button (equals to "-download" CLI option) |
||
Use the "Configuration Project Name" entry in the Project Settings to set the Name of the files to download.<br> |
Use the "Configuration Project Name" entry in the Project Settings to set the Name of the files to download.<br> |
||
| − | Optionally U-Flash can update the Flasher.INI file to select the latest project downloaded. (equal to Terminal Command [https://wiki.segger.com/UM08022_Flasher#Commands_and_replies |
+ | Optionally U-Flash can update the Flasher.INI file to select the latest project downloaded. (equal to Terminal Command [https://wiki.segger.com/UM08022_Flasher#Commands_and_replies "#Select"]) |
== J-Flash == |
== J-Flash == |
||
| − | * [https://wiki.segger.com/UM08003_JFlash#File_menu_elements |
+ | * [https://wiki.segger.com/UM08003_JFlash#File_menu_elements Download config & data file to Flasher] (equals to "-download" CLI option) |
| + | |||
| − | * [https://wiki.segger.com/UM08003_JFlash#File_menu_elements| Save Flasher data file] and [https://wiki.segger.com/UM08003_JFlash#File_menu_elements| Save Flasher config file] to computer hard disk. To download the saved files to the Flasher use: |
||
| + | == Both == |
||
| − | ** [https://wiki.segger.com/UM08022_Flasher#File_system| File Access Mode (MSD)] |
||
| + | * [https://wiki.segger.com/UM08003_JFlash#File_menu_elements Save Flasher data file] and [https://wiki.segger.com/UM08003_JFlash#File_menu_elements Save Flasher config file] to computer hard disk. To download the saved files to the Flasher use: |
||
| − | ** [https://wiki.segger.com/UM08022_Flasher#FTP_Server| FTP Server of Flasher] |
||
| − | ** [https://wiki.segger.com/ |
+ | ** [https://wiki.segger.com/UM08022_Flasher#File_system File Access Mode (MSD)] |
| + | ** [https://wiki.segger.com/UM08022_Flasher#FTP_Server FTP Server of Flasher] |
||
| + | ** [https://wiki.segger.com/UM08003_JFlash#File_menu_elements Show Files on Flasher] |
||
To set the name on the Flasher of the project which should be downloaded, you can attach the Flasher in File Access Mode to the computer and use the "Save Flasher data file" and "Save Flasher config file" |
To set the name on the Flasher of the project which should be downloaded, you can attach the Flasher in File Access Mode to the computer and use the "Save Flasher data file" and "Save Flasher config file" |
||
to directly store the files on the Flasher, which a name you want. (equals to CLI Option: "-savecfg <name> -savedat <name>") <br> |
to directly store the files on the Flasher, which a name you want. (equals to CLI Option: "-savecfg <name> -savedat <name>") <br> |
||
| − | Then use the Terminal Command [https://wiki.segger.com/UM08022_Flasher#Commands_and_replies |
+ | Then use the Terminal Command [https://wiki.segger.com/UM08022_Flasher#Commands_and_replies "#Select"] make the project active for programming. |
Latest revision as of 19:08, 29 November 2023
Configure the Flasher for Stand-Alone Mode
U-Flash
- "Send to Flasher" Button (equals to "-download" CLI option)
Use the "Configuration Project Name" entry in the Project Settings to set the Name of the files to download.
Optionally U-Flash can update the Flasher.INI file to select the latest project downloaded. (equal to Terminal Command "#Select")
J-Flash
- Download config & data file to Flasher (equals to "-download" CLI option)
Both
- Save Flasher data file and Save Flasher config file to computer hard disk. To download the saved files to the Flasher use:
To set the name on the Flasher of the project which should be downloaded, you can attach the Flasher in File Access Mode to the computer and use the "Save Flasher data file" and "Save Flasher config file"
to directly store the files on the Flasher, which a name you want. (equals to CLI Option: "-savecfg <name> -savedat <name>")
Then use the Terminal Command "#Select" make the project active for programming.
