Difference between revisions of "GigaDevice GD32A5"
(→Internal Flash) |
|||
| Line 12: | Line 12: | ||
|- |
|- |
||
| − | | Main flash Bank 1 || |
+ | | Main flash Bank 1 || 0x08040000 || 128 KB || style="text-align:center;"| {{YES}} |
|} |
|} |
||
Revision as of 11:48, 15 February 2024
The GD32A50x series are 32-bit general-purpose microcontrollers based on the Arm® Cortex®-M33 processor.
Contents
Flash Banks
Internal Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| Main flash Bank 0 | 0x08000000 | Up to 256 KB | 
|
| Main flash Bank 1 | 0x08040000 | 128 KB |
|
Internal ECC RAM
| Device | StartAddr | Size |
|---|---|---|
| GD32A503xB | 0x20000000 | 24Kb |
| GD32A503xC | 0x20000000 | 32Kb |
| GD32A503xD | 0x20000000 | 48Kb |
*** Additional information ***
In order to prevent errors when reading first time, the DLL intialises the first 24Kb of RAM starting at 0x2000 0000.
Supported Flash Banks
Internal Flash
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| GD32A503xB | 0x08000000 | 128Kb |
|
| GD32A503xC | 0x08000000 | 256Kb |
|
| GD32A503xD | 0x08000000 | 384Kb |
|
Option Byte
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| GD32A503xx | 0x1FFFF800 | 24 Byte |
|
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82b or later
Evaluation Boards
- GigaDevice GD32A503-EVAL evaluation board: https://wiki.segger.com/GigaDevice_GD32A503-EVAL
Example Application
- GigaDevice GD32A503-EVAL evaluation board: https://wiki.segger.com/GigaDevice_GD32A503-EVAL#Example_Project
