GigaDevice GD32VW553H-EVAL

From SEGGER Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This article describes specifics for the GigaDevice GD32VW553H-EVAL evaluation board.
GigaDevice-GD32VW553H-EVAL GD32VW553H board.jpg

Preparing for J-Link

  • Connect the J-Link to JP1.
  • Power the board via CN2.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

GigaDevice-GD32VW553H-EVAL GD32VW553H connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32VW553H-EVAL.
It is a simple Hello World sample linked into the internal flash.

SETUP