GigaDevice GD32VW553K-START
Revision as of 11:08, 15 January 2024 by Torben.scharping (talk | contribs) (Created page with "__TOC__ This article describes specifics for the GigaDevice GD32VW553K-START evaluation board.<br> 450px == Prepari...")
This article describes specifics for the GigaDevice GD32VW553K-START evaluation board.
Preparing for J-Link
- Connect the J-Link to JP1.
- Power the board via CN2.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32VW553K-START.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.92l
- Embedded Studio: V6.34
- Hardware: GigaDevice GD32VW553K-START
- Link: File:GigaDevice GD32VW553H-EVAL GD32VW553H TestProject ES V634.zip