HPMicro HPM6200EVK

From SEGGER Wiki
Revision as of 11:04, 13 April 2023 by Arne.kulinna (talk | contribs) (Created page with "__TOC__ This article describes specifics for the HPMicro HPM6200EVK evaluation board. It can be used to test & verify HPM62xx device support. File:HPMicro_HPM6200EVK.jpg|4...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the HPMicro HPM6200EVK evaluation board. It can be used to test & verify HPM62xx device support.

HPMicro HPM6200EVK.jpg

Minimum requirements

  • J-Link software V7.86g or later

Preparing for J-Link

  • Remove JP1, JP2, JP3 and JP4
  • Connect the J-Link to the JTAG connector (CN1)
  • Power the board via external power supply USB (J5)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

HPMicro HPM6280EVK Connect.PNG

Retrieved from "https://wiki.segger.com/index.php?title=HPMicro_HPM6200EVK&oldid=14707"