Hilscher netX90
The netX90 is the newest addition to Hilscher’s SoC family that provides a superior solution with an unmatched protocol flexibility for a variety of industrial slave or device applications in the process and factory automation.
Debug Support
The J-Link support for the Hilscher netX90 includes both Cortex-M4 cores, COM core and APP Core.
To be able to connect to the APP core it first needs to be enabled via an application running in the COM core.Initialization of the APP core is user responsibility.
For information about how this can be achieved we recommend to contact Hilscher support or use their netX90 documentation for reference.On-Chip Memory Regions
The internal flash is divided into 3 different regions for the COM core:
Instance Name | Size | Memory range |
---|---|---|
Bank 0 | 512 KB | 0x00100000 - 0x0017FFFF |
Bank 1 | 512 KB | 0x00180000 - 0x001FFFFF |
Bank 2 | 512 KB | 0x00200000 - 0x0027FFFF |
The App core has only access to internal flash bank 2:
Instance Name | Size | Memory range |
---|---|---|
Bank 2 | 512 KB | 0x00200000 - 0x0027FFFF |
Trace Support
See: Tracing on Hilscher netX90
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Hilscher NetX90 evalboard. It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.55d
- Embedded Studio: V5.50d
- Hardware: Hilscher NXHX 90-JTAG evalboard (silicon revision 1916)
- Link: File:Hilscher NetX90 ComCore TestProject ES V550d.zip
- Link: File:Hilscher NetX90 AppCore TestProject ES V550d.zip
Note: The App core example works only, when the App Core has been enabled by the Com core.