Difference between revisions of "J-Flash"
m |
m (Erik moved page CRC calculation to J-Flash) |
(No difference)
|
Revision as of 11:41, 27 November 2019
J-Flash and Flasher are using a CRC. The CRC used is the CRC32-CCITT polynomial.
Normal form: 0x04C11DB7 Reversed form: 0xEDB88320 (used by J-Flash)
Please note, that the initial CRC used for the calculation is 0x00000000 (some calculators use 0xFFFFFFFF).
Further information regarding this can be found here:
- SEGGER Knowledge Base: Explaining CRC
- Wikipedia: https://en.wikipedia.org/wiki/Cyclic_redundancy_check#Standards_and_common_use (table entry for CRC-32)
- J-Flash User Guide: UM08003 chapter "9.1 CRC of current data file"