J-Link DLL Updater

From SEGGER Wiki
Revision as of 12:27, 11 August 2023 by Simon Buchholz (talk | contribs)
Jump to: navigation, search

The J-Link DLL Updater is a tool provided by SEGGER to update the J-Link DLL used by applications that support J-Link, such as IDEs. Software that uses the J-Link DLL to include J-Link support usually comes with its own version of the J-Link DLL. While this provides a good out-of-the-box experience, it also means that support for new devices will not be automatically available in such applications. To update the J-Link DLL, you need to close all J-Link related applications, download the latest version of the J-Link software, and run the installer. At the end of the installation process, the J-Link DLL Updater will pop up and you can use it to update the J-Link DLL used by your application1. If the updater cannot find the DLL of your IDE installation, you may need to update it manually by locating JLink_x64.dll and/or JLinkARM.dll within the install directory of your IDE and replacing them with the ones that were just installed1.


List of Supported Studios
Studio Supportet Notes
ATMEL_STUDIO Yes
CODEWARRIOR Yes
Development Studio Yes
Embedded Studio Yes
EWARM Yes
E2STUDIO No The JLinkARM.dll is located at: C:\Users\%USERNAME%\.eclipse\com.renesas.platform_60129013\DebugComp\RA\ARM\Segger

Note that the Path varies a bit dependent of the E2Studio version Update the DLL the generic way

Kinetis Design Studio Yes
Keil MDK (8051 / ARM) Yes
MICROINSPECTOR Yes
MPLAB X IDE Yes
OZONE Yes
Percepio Tracealyzer Yes
S32 Design Studio Yes
SWIFTX Yes
µC/Probe Yes