Difference between revisions of "J-Trace vs. J-Trace PRO"
(Created page with "We often get asked what the benefits are upgrading from a older J-Trace CM (SN starting with 23) to a J-Trace PRO Cortex (SN starting with 75 or 93). The following list shows...") |
|||
Line 9: | Line 9: | ||
* Making use of all debug features offered by Ozone. |
* Making use of all debug features offered by Ozone. |
||
* Faster maximum SWO clock speed, 100 MHz instead of 6 MHz. |
* Faster maximum SWO clock speed, 100 MHz instead of 6 MHz. |
||
+ | |||
+ | Make use of SEGGER's trade in program to get a discount on your new J-Trace PRO model! |
||
+ | https://www.segger.com/purchase/trade-in-program/ |
Revision as of 16:30, 20 April 2018
We often get asked what the benefits are upgrading from a older J-Trace CM (SN starting with 23) to a J-Trace PRO Cortex (SN starting with 75 or 93). The following list shows the improvements over the older J-Trace model:
- Supports streaming trace, enabling live trace features like live code coverage, code profiling and execution counters.
- Faster maximum Traceclock supported (150 MHz) for even the fastest target devices.
- GBit Ethernet Interface for easier remote access to J-Trace + higher transfer speed than USB2.0.
- USB3.0 interface for very fast transfer speeds to host PC for trace analysis.
- Adjustable trace clock sampling timing for easier troubleshooting of trace connections with target devices that are out of Arm trace specification.
- Tracing on Cortex-A, -R additionally to Cortex-M supported on the J-Trace PRO Cortex.
- Making use of all debug features offered by Ozone.
- Faster maximum SWO clock speed, 100 MHz instead of 6 MHz.
Make use of SEGGER's trade in program to get a discount on your new J-Trace PRO model! https://www.segger.com/purchase/trade-in-program/