Difference between revisions of "Kinetis KE1xZ 48 MHz series"
(→Requirements) |
(→Requirements) |
||
Line 21: | Line 21: | ||
* SEGGER Embedded Studio V3.52 or later |
* SEGGER Embedded Studio V3.52 or later |
||
* J-Link software V6.36 or later. (Install after Embedded Studio and let J-Link installer update the Embedded Studio installation) |
* J-Link software V6.36 or later. (Install after Embedded Studio and let J-Link installer update the Embedded Studio installation) |
||
+ | * Board: [https://wiki.segger.com/FRDM-KE16Z FRDM-KE16Z] |
||
<references/> |
<references/> |
Latest revision as of 15:29, 18 October 2018
The NXP Kinetis KE1xZ 48 MHz series is designed for white goods and industrial applications. It incorporates an ARM Cortex-M0+ core.
J-Link support
The KE14Z32, KE14Z64, KE15Z32, KE15Z64, KE16Z32, KE16Z64 are supported since the following J-Link software versions:
- V6.35g (beta) or later: Download latest beta
- V6.36 (release) or later: Download latest release
Watchdog support
Debugging and flash programming with the watchdog (WDOG) being enabled (in non-windowed mode) is supported. Windowed mode of the watchdog is not supported for debugging and flash programming.
MTB trace
The KE1xZ 48 MHz series devices incorporate an ARM MTB on-chip trace buffer that allows instruction backtrace. For more information about MTB in general, please refer to here: Article MTB.
Example projects
Requirements
The following are the min. requirements to run the example project:
- SEGGER Embedded Studio V3.52 or later
- J-Link software V6.36 or later. (Install after Embedded Studio and let J-Link installer update the Embedded Studio installation)
- Board: FRDM-KE16Z