Difference between revisions of "LPC546xx"
(Created page with "The NXP LPC546xx series devices are flashless Cortex-M4 based IoT devices. They always boot from external memory (usually QSPI flash). __TOC__ = SWO = SWO for the NXP LPC546x...") |
(→SWO) |
||
Line 7: | Line 7: | ||
== Requirements == |
== Requirements == |
||
In order to make SWO working correctly, min. J-Link software V6.86d is recommended. Previous versions are not guaranteed to work correctly with SWO. |
In order to make SWO working correctly, min. J-Link software V6.86d is recommended. Previous versions are not guaranteed to work correctly with SWO. |
||
+ | |||
+ | == Available pins == |
||
+ | The NXP LPC546xx MCU provides to pins that can be used for SWO. |
||
+ | *PIO0_8 |
||
+ | *PIO0_10 |
||
== Sample projects == |
== Sample projects == |
Revision as of 15:30, 15 October 2020
The NXP LPC546xx series devices are flashless Cortex-M4 based IoT devices. They always boot from external memory (usually QSPI flash).
SWO
SWO for the NXP LPC546xx series devices is supported out-of-the-box.
Requirements
In order to make SWO working correctly, min. J-Link software V6.86d is recommended. Previous versions are not guaranteed to work correctly with SWO.
Available pins
The NXP LPC546xx MCU provides to pins that can be used for SWO.
- PIO0_8
- PIO0_10
Sample projects
Please refer to LPCXpresso54608 Eval.