Difference between revisions of "MPS3"
Line 21: | Line 21: | ||
|Via [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/j-link-mictor-38-adapter/ J-Link Mictor 38 Adapter] |
|Via [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/j-link-mictor-38-adapter/ J-Link Mictor 38 Adapter] |
||
|} |
|} |
||
+ | |||
+ | [[File:Eval-M1-1302_Debug.jpg|Debug connector|thumb|none]] |
||
<references/> |
<references/> |
Revision as of 11:16, 4 July 2018
Contents
The ARM MPS3 board is an FPGA based board for core prototyping. One example use case is the ARM CoreLink SSE-200 prototyping platform . The board provides an LCD display, QSPI flash, 7 user LEDs and a many other peripherals.
How to connect J-Link
There are multiple connectors on the MPS3 board that allow J-Link connection.
Connector | Description |
---|---|
CS-20W_2.54mm | |
CS_20W_1.27mm | Via J-Link 19-pin Cortex-M Adapter |
CS_10W_1.27mm | Via J-Link 9-pin Cortex-M Adapter |
TRACE | Via J-Link Mictor 38 Adapter |