Difference between revisions of "MPS3"
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
| Line 21: | Line 22: | ||
|Via [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/j-link-mictor-38-adapter/ J-Link Mictor 38 Adapter] |
|Via [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/j-link-mictor-38-adapter/ J-Link Mictor 38 Adapter] |
||
|} |
|} |
||
| + | |||
| + | [[File:Eval-V2M-MPS3.jpg|MPS3 board|thumb|none]] |
||
<references/> |
<references/> |
||
Latest revision as of 11:44, 16 May 2024
Contents
The ARM MPS3 board is an FPGA based board for core prototyping. One example use case is the ARM CoreLink SSE-200 prototyping platform . The board provides an LCD display, QSPI flash, 7 user LEDs and a many other peripherals.
How to connect J-Link
There are multiple connectors on the MPS3 board that allow J-Link connection.
| Connector | Description |
|---|---|
| CS-20W_2.54mm | |
| CS_20W_1.27mm | Via J-Link 19-pin Cortex-M Adapter |
| CS_10W_1.27mm | Via J-Link 9-pin Cortex-M Adapter |
| TRACE | Via J-Link Mictor 38 Adapter |
