MindMotion MM32F3
Revision as of 17:40, 7 December 2023 by Simon Buchholz (talk | contribs) (→Lock and Unlock Support)
Contents
The Mimdmotion MM32F3 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M3 processor.
Device Family
Device Family | Flash Size | RAM Size |
---|---|---|
MM32F327 | up to 512Kb | 128Kb |
Supported Flash Banks
Internal Flash
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F327 | 0x08000000 | up to 512Kb | Yes |
- Unlocking of Flash read protection not supported yet.
Option Byte
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F327 | 0x1FFFF800 | 40b | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82e or later
Lock and Unlock Support
Device | J-Link Commander and J-Flash: native Unlock support |
J-Link Commander: Lock via command file |
J-Flash[1]: native lock support |
J-Flash: Lock project |
---|---|---|---|---|
MM32F3 32KB | MM32F0_32KB_Lock.jlink | MM32F0_32KB_Lock.jflash | ||
MM32F3 64KB | MM32xx_64KB_Lock.jlink | MM32xx_64KB_Lock.jflash | ||
MM32F3 128KB | MM32xx_128KB_Lock.jlink | MM32xx_128KB_Lock.jflash | ||
MM32F3 256KB | MM32xx_256KB_Lock.jlink | MM32xx_256KB_Lock.jflash | ||
MM32F3 512KB | MM32xx_512KB_Lock.jlink | MM32xx_512KB_Lock.jflash |
Evaluation Boards
- Mindmotion MM32F3270 MB-036 evaluation board: https://wiki.segger.com/Mindmotion-MB-036