Difference between revisions of "Mindmotion-NANO-F0270"
(Created page with "MM32 LQFP48") |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | __TOC__ |
||
| − | MM32 LQFP48 |
||
| + | |||
| + | This article describes specifics for the Mindmotion NANO-F0270 evaluation board. |
||
| + | |||
| + | [[File:MM-NANO-F0270-board.jpg|450px]] |
||
| + | |||
| + | == Minimum requirements == |
||
| + | * J-Link software V7.82e or later |
||
| + | |||
| + | == Preparing for J-Link == |
||
| + | *Connect the J-Link to J4 (Pin 1 is not at the DOT on the PCB, rotate cable 180°) |
||
| + | *Power the board via USB (UART or USB port) |
||
| + | * Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
| + | |||
| + | [[File:MM_NANAO-F0270_MM32F0270D7P_Connect.png |400px]] |
||
| + | |||
| + | == Example Project== |
||
| + | The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Mindmotion NANO-F0270 MM32F0273D7P.<br> |
||
| + | It is a simple Hello World sample linked into the internal flash.<br> |
||
| + | ====SETUP==== |
||
| + | *J-Link software: V7.82e |
||
| + | *Embedded Studio: V6.34 |
||
| + | *Hardware: Mindmotion NANO-F0270 |
||
| + | *Link: [[File:MM32_NANAO-0270_MM32F0273D7P_TestProject_ES_V634.zip]] |
||
Latest revision as of 17:43, 9 December 2022
This article describes specifics for the Mindmotion NANO-F0270 evaluation board.
Minimum requirements
- J-Link software V7.82e or later
Preparing for J-Link
- Connect the J-Link to J4 (Pin 1 is not at the DOT on the PCB, rotate cable 180°)
- Power the board via USB (UART or USB port)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Mindmotion NANO-F0270 MM32F0273D7P.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.82e
- Embedded Studio: V6.34
- Hardware: Mindmotion NANO-F0270
- Link: File:MM32 NANAO-0270 MM32F0273D7P TestProject ES V634.zip
