Difference between revisions of "Multiple J-Links at the same PC"
(→General behavior) |
(→Connecting to a specific J-Link) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
== Connecting to a specific J-Link == |
== Connecting to a specific J-Link == |
||
A J-Link is identified by its serial number (S/N), so in order to connect to a specific J-Link, the S/N needs to be specified, to avoid the selection dialog to pop up. How the S/N is specified depends on the IDE / environment in which J-Link is used. In the following, the specification for different IDEs / environments is listed: |
A J-Link is identified by its serial number (S/N), so in order to connect to a specific J-Link, the S/N needs to be specified, to avoid the selection dialog to pop up. How the S/N is specified depends on the IDE / environment in which J-Link is used. In the following, the specification for different IDEs / environments is listed: |
||
| + | * [[J-Link Commander#Connecting to a specific J-Link | J-Link Commander]] |
||
| − | <TBD> |
||
Latest revision as of 09:36, 24 July 2017
It is possible to have multiple J-Links connected to the same PC. For the IP/Ethernet based models (J-Link PRO, Flasher PRO, ...) this is pretty clear, but it is also possible for the USB-only based models.
General behavior
When having multiple J-Links connected to the same PC via USB and no specific J-Link is specified to connect to, by default the following dialog pops up, allowing to select a J-Link to connect to:
Connecting to a specific J-Link
A J-Link is identified by its serial number (S/N), so in order to connect to a specific J-Link, the S/N needs to be specified, to avoid the selection dialog to pop up. How the S/N is specified depends on the IDE / environment in which J-Link is used. In the following, the specification for different IDEs / environments is listed:
