Multiple J-Links at the same PC

From SEGGER Wiki
Revision as of 08:43, 24 July 2017 by Alex (talk | contribs) (Created page with "It is possible to have multiple J-Links connected to the same PC, also for the USB-only models. When having multiple J-Links connected to the same PC via USB and no specific J...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

It is possible to have multiple J-Links connected to the same PC, also for the USB-only models. When having multiple J-Links connected to the same PC via USB and no specific J-Link is specified to connect to, by default the following dialog pops up, allowing to select the one to connect to: <TBD>

Connecting to a specific J-Link

A J-Link is identified by its serial number (S/N), so in order to connect to a specific J-Link, the S/N needs to be specified, to avoid the selection dialog to pop up. How the S/N is specified depends on the IDE / environment in which J-Link is used. In the following, the specification for different IDEs / environments is listed: <TBD>

Retrieved from "https://wiki.segger.com/index.php?title=Multiple_J-Links_at_the_same_PC&oldid=1515"