NXP FRDM-KE17Z512
This article describes specifics for the NXP FRDM-KE17Z512 evaluation board.
Preparing for J-Link
- Connect the J-Link to ......
- Power the board via........
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
[PICTURE OF CONNECT] 400px
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP FRDM-KE17Z512.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.xx
- Embedded Studio: V7.20
- Hardware: NXP FRDM-KE17Z512
- Link: File:NXP FRDM-KE17Z512 TestProject ES V452b.zip