Difference between revisions of "NXP FRDM-MCXA156"

From SEGGER Wiki
Jump to: navigation, search
(SETUP)
 
(3 intermediate revisions by the same user not shown)
Line 5: Line 5:
   
 
== Preparing for J-Link ==
 
== Preparing for J-Link ==
*Connect the J-Link to J12, JP8 hast to set in order to disable MCU-Link on the PCB and work with J-Link.
+
*Connect the J-Link to J24, JP8 hast to set in order to disable MCU-Link on the PCB and work with J-Link.
*Power the board via USB J7.
+
*Power the board via USB J21.
 
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
 
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
 
[[File:NXP_FRDM-MCXA156_MCXA156VL_connect.png|400px]]
 
[[File:NXP_FRDM-MCXA156_MCXA156VL_connect.png|400px]]
Line 14: Line 14:
 
It is a simple Hello World sample linked into the internal flash.<br>
 
It is a simple Hello World sample linked into the internal flash.<br>
 
====SETUP====
 
====SETUP====
*J-Link software: V7.96c
+
*J-Link software: V7.96a
 
*Embedded Studio: V7.20
 
*Embedded Studio: V7.20
 
*Hardware: NXP FRDM-MCXA156
 
*Hardware: NXP FRDM-MCXA156
*Link: [[File:NXP_X-FRDM-MCXA156_MCXA156_TestProject_ES_7V20.zip]]
+
*Link: [[File:NXP_FRDM-MCXA156_MCXA156VL_TestProject_ES_V720.zip]]

Latest revision as of 11:08, 13 March 2024

This article describes specifics for the NXP FRDM-MCXA156 evaluation board.
NXP FRDM-MCXA156 MCXA156VL board.jpg

Preparing for J-Link

  • Connect the J-Link to J24, JP8 hast to set in order to disable MCU-Link on the PCB and work with J-Link.
  • Power the board via USB J21.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

NXP FRDM-MCXA156 MCXA156VL connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP FRDM-MCXA156.
It is a simple Hello World sample linked into the internal flash.

SETUP