NXP FRDM-MCXA156

From SEGGER Wiki
Revision as of 11:06, 13 March 2024 by Torben.scharping (talk | contribs) (→‎Preparing for J-Link)
Jump to: navigation, search

This article describes specifics for the NXP FRDM-MCXA156 evaluation board.
NXP FRDM-MCXA156 MCXA156VL board.jpg

Preparing for J-Link

  • Connect the J-Link to J24, JP8 hast to set in order to disable MCU-Link on the PCB and work with J-Link.
  • Power the board via USB J21.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

NXP FRDM-MCXA156 MCXA156VL connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP FRDM-MCXA156.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=NXP_FRDM-MCXA156&oldid=18286"