Difference between revisions of "NXP NxH3675"
(One intermediate revision by the same user not shown) | |||
Line 12: | Line 12: | ||
===ECC flash=== |
===ECC flash=== |
||
− | The flash |
+ | The flash is ECC protected. Read fails for sectors with invalid ECC (e.g. erased sectors). In order to prevent errors when reading empty sectors, the DLL do neither perform a blank check nor a compare of the flash content before programming. |
==Reset== |
==Reset== |
||
+ | The J-Link software performs a device specific reset for this device. |
||
− | The NXP NxH3675 devices require a special reset handling because some registers are not reset to their reset values correctly, due to a silicon bug. |
||
− | This is done by J-Link automatically. |
||
==Evaluation Boards== |
==Evaluation Boards== |
||
Line 22: | Line 21: | ||
==Example Application== |
==Example Application== |
||
− | * [[NXP_NxH3675_SDK#Example_Project | NXP NxH3675 SDK |
+ | * [[NXP_NxH3675_SDK#Example_Project | NXP NxH3675 SDK example project]] |
Latest revision as of 10:03, 26 May 2021
Contents
The NXP NxH3675 are ultra-low power, Cortex-M0+ based wireless microcontrollers supporting Bluetooth Low Energy. This article covers the NXP (Cortex-M0+ dual-core).
Internal Flash
Supported Regions
The internal flash is divided into 2 different regions:
- Reserved by NXP region (0x9EC00 - 0x9FFFF)
- Application space (0x00000 - 0x9EBFF)
For now, the J-Link supports the application space, only.
ECC flash
The flash is ECC protected. Read fails for sectors with invalid ECC (e.g. erased sectors). In order to prevent errors when reading empty sectors, the DLL do neither perform a blank check nor a compare of the flash content before programming.
Reset
The J-Link software performs a device specific reset for this device.