Difference between revisions of "NXP i.MX 8"
m (Artjom.Kister moved page i.MX 8 to NXP i.MX 8) |
|
(No difference)
|
Revision as of 11:08, 5 April 2024
Debugging
Debugging of Cortex-A72, Cortex-A53 and Cortex-M4 cores is enabled after primary boot stage.
A boot image should contain System Controller Unit (SCU) and Security Controller (SECO) firmware images packed in containers.
After the boot stage J-Link can be attached to a running target.
Note:
After reset a watchdog timer is enabled. System Controller firmware is responsible to pereodicaly refresh the timer.