Difference between revisions of "Nuvoton NuMaker-NUC1262SE"
(Created page with "__TOC__ This article describes specifics for the Nuvoton NuMaker-NUC1262SE evaluation board.<br> 600px == Preparing for J-Link ==...") |
|||
(One intermediate revision by the same user not shown) | |||
Line 2: | Line 2: | ||
This article describes specifics for the Nuvoton NuMaker-NUC1262SE evaluation board.<br> |
This article describes specifics for the Nuvoton NuMaker-NUC1262SE evaluation board.<br> |
||
− | [[File: |
+ | [[File:Nuvoton_NuMaker-NUC1262SE_V1.2_NUC1262SE4AE_board.jpg|600px]] |
== Preparing for J-Link == |
== Preparing for J-Link == |
||
Line 8: | Line 8: | ||
*Power the board via J2 or ICE J3 |
*Power the board via J2 or ICE J3 |
||
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
− | [[File:Nuvoton_NuMaker- |
+ | [[File:Nuvoton_NuMaker-NUC1262SE_V1.2_NUC1262SE4AE_connect.png|400px]] |
== Example Project== |
== Example Project== |
||
Line 17: | Line 17: | ||
*Embedded Studio: V6.34 |
*Embedded Studio: V6.34 |
||
*Hardware: Nuvoton NuMaker-NUC1262SE |
*Hardware: Nuvoton NuMaker-NUC1262SE |
||
− | *Link: [[:File:Nuvoton_NuMaker- |
+ | *Link: [[:File:Nuvoton_NuMaker-NUC1262SE_V1.2_NUC1262SE4AE_TestProject_ES_V634.zip]] |
Revision as of 13:34, 23 March 2023
This article describes specifics for the Nuvoton NuMaker-NUC1262SE evaluation board.
600px
Preparing for J-Link
- Connect the J-Link : VTref=J1-2 / SWDIO=J1-4 / SWCLK=J1-6 / GND=J1-10
- Power the board via J2 or ICE J3
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Nuvoton NuMaker-M071MD.
It is a simple Hello World sample linked into the internal flash.
SETUP
- J-Link software: V7.86e
- Embedded Studio: V6.34
- Hardware: Nuvoton NuMaker-NUC1262SE
- Link: File:Nuvoton_NuMaker-NUC1262SE_V1.2_NUC1262SE4AE_TestProject_ES_V634.zip